60x120 Porcelain Tiles for Wholesale and Export 600x1200 mm large format, factory direct from Ardakan

One piece covers 0.72 m². Across a lobby or an open-plan interior that is roughly half the grout line of a 60x60 layout, so the floor reads as a continuous plane and there is less grout to clean and to discolour.

A 1200 mm face carries a longer marble vein or timber grain than a square format, which is what makes book-matched walls and continuous plank floors possible without the pattern repeating in view.

The same code in the same shade batch can run across a floor and up a full-height wall, which removes the transition detail between the two surfaces in bathrooms and hotel rooms.

Because the yard holds three million square metres, a 60x120 order can be filled from a single shade batch — and several designs of one body type can travel in a mixed container.

Residential Projects

Apartment and villa floors, open-plan living areas and full-height bathroom walls, where the long format keeps the joint count low in a small area.

Hotels and Hospitality Spaces

Lobbies, corridors, guest bathrooms and spa areas. Traffic and wet-area exposure decide the finish, so match the abrasion and slip figures to each space.

Commercial Buildings and Offices

Retail units, shopping malls, offices and restaurants, where a large continuous surface is wanted and the floor has to survive cleaning machinery.

Bathrooms and Wet Areas

Floors and walls in bathrooms, shower rooms and changing areas. Specify matt or textured for the floor and keep the polished surface for the wall.

Living Rooms and Open-Plan Interiors

Large uninterrupted areas where the tile continues from one room into the next without a threshold and without the grid reading as a pattern.

Outdoor Areas and Terraces

Terraces, balconies and covered walkways, only in models whose datasheet confirms frost resistance and an adequate slip rating for the exposure.

• Export catalogue and per-model technical datasheets
• Sample boxes before a bulk order
• Full container and mixed container loading
• Distributor and project pricing on volume
• Private label and OEM production, subject to factory confirmation

• Commercial invoice
• Packing list
• Certificate of origin
• Bill of lading
• Technical datasheet per model

The nominal size is 600 × 1200 mm, so one piece covers 0.72 m². The rectified work size and the permitted deviation are stated on each model's datasheet, so quote the code when the tolerance matters to the layout.

Suitability belongs to the model, not the size: finish, thickness and abrasion class decide it. Send your room schedule and the desk will confirm which codes in 60 × 120 cm are approved for floor, for wall, or for both.

Porcelain is pressed and fired to a denser body with very low water absorption, which is why it takes heavier traffic and wet areas. In 60 × 120 cm we also produce white body and red body for lighter duty and a lower delivered cost — the datasheet states the body for each code.

Available finishes are listed in the Finishes & Designs section above, in selected models. Ask the desk to confirm which codes carry the finish and colourway you need before the order is placed.

Yes, this size leaves the works rectified; the datasheet states it per model. A ground edge makes a more uniform installation possible, but the achievable joint width also depends on the substrate and the fixing instructions followed on site.

The figure is taken from each model datasheet and is not published as a single number for the whole size, since it varies by body and by model.

MOQ depends on the model, the design, the production plan, the packing and the destination. Send the requirement through the quotation form and the desk replies with the applicable minimum.

The quantity depends on the pieces per carton, the thickness and the model. It is printed on the packing list attached to every quotation.

Yes to all three. The catalogue and datasheets are sent as PDFs, and sample boxes are dispatched on request — the desk states the preparation time and freight arrangement for your destination.

Yes, factory direct. Minimum order quantity is set per model and destination and is stated on the quotation. A proforma invoice is issued once the models, quantity, destination and incoterm are confirmed.

The works at Ardakan, Yazd, ships to thirty-five countries. Routes are road, rail or sea through Bandar Abbas; the desk confirms the available route, documents and delivery terms for a given destination.

It depends on each model reaching its own MOQ, on the container capacity and payload, and on the production schedule. Mixed loading is confirmed before the proforma invoice is issued.

Commercial invoice, packing list, certificate of origin, bill of lading and the technical datasheet. Any additional certificate is confirmed case by case before shipment.

EXW, FOB, CFR and CIF are quoted where the route to the destination supports them. The desk confirms which terms and which route apply to your market.

Private label and OEM production are discussed case by case. Feasibility, minimum quantity, carton artwork, lead time and brand requirements are confirmed with the factory before an order is accepted.

They are the same nominal size written two ways: 60x120 is the centimetre form used in catalogues and 600x1200 mm is the technical form used on datasheets and in quotations.

Only where the model is approved for it. Frost resistance, slip rating, thickness and the intended application all have to be confirmed on the datasheet; a polished surface is not necessarily suitable outdoors.

Matt, polished, glossy, lappato, textured and anti-slip surfaces are produced, available in selected models. Ask for the current list of codes carrying the finish you need in the design and colourway you want.

The 600x1200 lines leave the works rectified; the datasheet states it per model. A ground edge makes a more uniform installation possible, but the achievable joint width also depends on the substrate and on the fixing instructions followed on site.